Herrmann Ultraschall at the Index 2020: Ultra...
Herrmann Ultraschall at the Index 2020

Ultrasonic technology for the nonwovens industry

Herrmann Ultraschall
Quality assessment by comparing micrographs of bonding spots with higher (left) and lower (right) percentage of PET in the bi-component fibers
Quality assessment by comparing micrographs of bonding spots with higher (left) and lower (right) percentage of PET in the bi-component fibers

Air-Through Bonded (ATB) materials increase the softness of products – typical hygiene applications are acquisition distribution layers (ADL), waist panels, and top sheets.

ATB is becoming popular because the feel, look and sound of disposable hygiene products before use can greatly affect consumer perceptions of softness. That makes it critical for disposable hygiene manufacturers to understand and evaluate their own production processes for impact on softness. ATB is a costly material and producers are interested in minimizing production scrap when further processing ATBs. It has been problematic to understand why some ATB bond well and others do not.
Herrmann Ultraschalltechnik GmbH & Co. KG, Karlsbad/Germany, has configured a portfolio to determine and evaluate typical ATB materials – making use of extensive laboratory equipment such as a scanning electron microscope and a differential scanning calorimetry. This service can help manufacturers to foresee bonding challenges and material wastage.
Bi-component (bico) fibers are an important part of ATB. So-called core-sheath bico, where one polymer is mantled by a second polymer, is a frequently processed bonding fibers for ATB nonwovens. A bi-component fiber is used to exploit capabilities not existing in either polymer alone: PE increases softness, PET gives strength but has the disadvantage of the high melting point. PLA might be used when fibers from natural sources are being asked for, to name just a few. The melting point of the sheath material is lower than that of the core material, with the result that the core fibers adhere at the crossing points. The sheath ratio of the fiber can vary depending on the manufacturer and the differential scanning calorimetry helps to determine these exact material ratios.
The evaluation of the surface and cross-section of the different laminated materials with the help of a scanning electron microscope allow a study of the fiber quality and an assessment of the weld quality. ATB material can vary greatly – the fiber composition has a strong influence on the material behavior and needs to be evaluated ideally prior to bonding. Weld performance can now also be tested beforehand.
The Index 20 has been postponed to October 20-23, 2020.

Herrmann Ultraschall at the Index 2020: Stand 1541

Your Newsletter for the Textile Industry

From the industry for the industry – sign up for your free newsletter now